SAL-390 auto loader for injection molding machines

Auto loader SAL-390 is often used auxiliary equipment for loading plastic material to the hopper. It is called as vacuum suction machine.The vacuum automatic suction machine uses Roots blower to pump air, so that the inlet of the suction nozzle and the whole system are in a certain negative pressure state. The powder particles are sucked into the nozzle along with the outside air, forming a material flow, and then arrive at the hopper through the suction pipe, where the gas and material are separated. The separated materials enter the receiving equipment. Feeding - discharging is completed by continuously opening and closing the pneumatic changeover valve, which is controlled by the control center.

Characteristic of Auto loader SAL-390 

-Imported high speed commutator motor , small cubage and strong suction. 

-Connection between operation controller and electric control box free and convenient operation

-Controlled by microcomputer, action precision

-Out hange air storage device to thoroughly clean the dust on the strainer

-Electric action detector and low fault rate. 

-Multi fault indicator lamp to facilitate the customer knowing the reason and handling in time. 

How to install Auto loader SAL-390 on injection molding machines